 |
Turbo™ 117G - High Voltage Silicone Rubber Extruded Fiberglass SleevingThermal Class: 200 ° C DescriptionTURBO™ 117G is comprised of specially formulated high temperature silicone rubber extruded onto premium electrical grade braided fiberglass sleeving. The extrusion process results in a higher density coating that is more homogenous, has better concentricity and yields longer continuous lengths than the typical liquid dipped products common to the industry. . Recomended UseTURBO™ 117G is recommended for use in all high voltage/high temperature applications, particularly in power transformers where class H sleeving is required Silicone rubber coated glass sleeving is the only flexible insulating material which remains useful for continuous service in ambient temperatures from -70°C through +200°C. Physical Properties• Thermal:TURBO™ 117G is rated Class H by IEEE standards, acceptable for continuous service from -70°C through 200°C. Operation at temperatures up to 315°C is tolerated for short durations. TURBO 117G exceeds all requirements of UL Subject 224 for 200°C, 600 volt operation. It also exceeds the requirements of MIL-I-3190 and ASTM D372. • Environmental:TURBO™ 117G is resistant to moisture, corona, ozone, radiation, compression set, fungus, most chemicals and solvents, weathering, flexure fatigue and heat degradation. • Flammability:TURBO™ 117G burns slowly. The coating maintains its electrical integrity - even under severe fire conditions - by forming a non-conductive ash.
Availability• Sizes:TURBO™ 117G is available in continuous spooled lengths or cut lengths in NEMA sizes # 20 through 3/4”. • Colors:TURBO™ 117G is available in white, black or iron oxide red. Other colors may be available subject to minimum order quantities and/or setup charges.
|
